LACP.
Group ID
You can set up link aggregator among two or more ports.
Choose “Group ID” and Click “Get”.
LACP
If enabled, the group is in LACP static trunking. If disabled,
the group is in local static trunking. All ports supports LACP
dynamic trunking grouping. If all connected devices support
LACP, the PACP dynamic trunking will be formed
automatically. If LACP enabled, LACP can be set into
positive/passive status in each port.
Notes: When you configure the trunking, make sure the
STPP is opened; otherwise, a redundant link is formed in the
ring network and cause network to break down.
Work Ports
The maximum ports that can be aggregated simultaneously.
If in a LACP trunking group, the additional ports is stand-by
and aggregated when work port is not valid. If in a local
static trunking group, the setting must be consistent with the
ports of group.
Add
To add port of Trunking.
4.4.5.2
Aggregator Information
Click “Aggregator Information”
，
you can see the info below when you set
LACP Aggregator as follows.
Figure4-13 Aggregator Information
