1-7, only valid in WRR mode.
Ex: Config qos fcfs
Config qos wrr 5 1
Enable qdlyb<1~255>
Enable the low queue delay bound function and
configure the delay bound time threshold value.
The valid value is 1-255ms. Ex: enable qdlyb
200.
Disable qdlyb
Disable queue delay bound function.
Show qos
Show Qos configuration
Config qospolicy<high level
list>
Configure QoS. PRI 0~7 mapped to high or low
queue..
<high level list>: belongs to high PRI. (0~7).
Ex: config qospolicy 0~3
3.3
Port Control
Command Description
Show portstatus <portlist>
Show status of per or multi port.
<portlist>: port number. Ex: show
portstatus 1-10
show portstatus 1,3,5
Show statistics <portlist>
Show status of per or multi port.
Ex: show statistics 1-10
show statistics 1,3,5
Config ports <portlist> state
[off/on]
Change configuration of one group port.
<portlist>: port number.
state off: disabled the port
state on: enabled the port
Ex: config ports 1-5 state off
Config ports <portlist> auto
[off/|on]
Enabled or disabled automatism of port.
<portlist>: port number.
auto off: disabled auto
auto on: enabled auto
Ex: config ports 1-5 auto off
Config ports <portlist> ability
[10full|10half|100full|100half]
Change speed of port and configure
duplex mode.
<portlist>: port number.
Ex: config ports 6,7 ability 10full
