３
.
If a port-based or ID-based VLAN is set up in the switch, the static
address will be related to the sole VLAN. Type the VLAN name
(port-based or ID based) relevant to MAC address
４
.
Click “Add”.
4.4.6.3
Port Security
The port will be locked in security mode and address study is not allowed.
Only the SMAC packets in address table can forward normally. You can
forbid the port to study any new MAC address and input the MAC address
that can use the secure port from the “Static MAC Address” page, click
“apply” to activate the change so that prevent illegal visit from end device.
Figure4-17 Port Security
4.4.6.4
MAC Filter
MAC filter allow the switch to give up the unwanted packets. Filter packet is
based on destination address.
Figure4-18 MAC Filter
