Figure2-29 MAC Address Configuration
１
.
Static MAC Address Configuration
You can add, edit or delete static MAC address from this page.
Figure2-30 Static MAC Address Configuration
When a static MAC address is added, it will be kept in the address table
of the switch whether the physical device is connected with the switch or
not, so that the switch do no need to study the address again after power
supply cut-off or resetting.
1
）
Adding a static state MAC address
a.
“
<Add>
Æ
<Edit>”
Æ
<Enter>, and then Add static MAC
address.
b.
Type a MAC address, whose flow the switch’s port will always
forward without considering the networking status.
c.
Type a port number.
d.
If the switch is set with tag-based (IEEE 802.1Q) VLAN, the
static address must be related with the only VLAN. Type the
VID related with MAC address.
e.
Press < Ctrl + A > to return to the main menu line and select
<Save> and <Enter> to save all the configurations.
