27
Follow these steps to turn on the system for the
first time.
a.
Ensure the antenna has a clear, unobstructed
view of the sky.
b.
Press the power switch on the rear panel of
the TV-Hub to apply power to the TracVision
system (see Figure 41).
c.
Within a few minutes, the TV-Hub and
Power lights should be lit green (the Antenna
light will be flashing green).
d.
Plug in and turn on any connected receivers,
DVRs, Genie clients, and televisions.
TV-Hub
Power Switch
Figure 41: TV-Hub Power Switch
During startup, the TV-Hub checks the
software versions installed in the antenna and
updates them if necessary to match the
versions it has stored for that model. All three
status lights (see Figure 42) will alternate
orange while this update is in progress.
Do
not turn off the system during this time.
Updates might take up to 40 minutes.
IMPORTANT!
TV-Hub Antenna Power
Figure 42: TV-Hub Status Lights
Turn On the System
14
Summary of Contents for tracvision tv8
Page 1: ...TracVision TV8 Installation Guide ...
Page 50: ......
