KVH Industries tracvision tv8, Installation Manual

Page: 16 / 51

15
The steps for connecting the customer’s
receiver(s) to the TracVision system and setting
them up depends upon the customer’s satellite
TV service (see Figure 20 and Figure 21).
NOTE: KVH’s TracVision Configuration Wizard,
available at www.kvh.com/tvseriesconfigurator ,
displays a wiring diagram and parts list for all of the
most common configurations.
Follow the steps in the applicable section below
to wire the receivers. Then connect the receiver(s)
to the customer’s television(s).
Linear . . . . . . . . . . . . . . . . . . . . . . . . page 16
DIRECTV (SWM) . . . . . . . . . . . . . . page 18
DIRECTV (Non-SWM) . . . . . . . . . page 20
DIRECTV Latin America . . . . . . . page 21
Tri-Americas . . . . . . . . . . . . . . . . . . page 22
DISH Network/Bell TV . . . . . . . . page 23
TV-Hub A
DIRECTV U.S.
Non-SWM Receivers
DISH Network, Bell TV
and Linear Receivers
DIRECTV U.S.
SWM Receivers
Figure 20: TV-Hub A Receiver Connections
TV-Hub B
Linear, Tri-Americas, and
DIRECTV Latin America Receivers
Figure 21: TV-Hub B Receiver Connections
Wire the Receivers
11