2-1
Installation
54-0144 Rev. C
2
Installation
2.1 Overview of Installation
TracVision Cruiser is designed for simple installation and
setup. Just follow these easy steps:
1. Choose the antenna location.
2. Mount the antenna unit.
3. Connect the antenna unit cables.
4. Connect the antenna unit to the TV IRD.
5. Connect the TV IRD to the TV.
2.1.1 Installation Tools and Materials Required
•
Electric drill, assorted drill bits and
1
⁄
2
˝
hole saw
•
Socket wrenches
•
Phillips and flat tip screwdrivers
• Installation kitpack containing stainless steel
hardware for mounting the Antenna Unit,
power switch, and switch plate
•
Augat Snap ‘n Seal Crimp/Strip Tool (Part
Number IT1000) if using the KVH-provided
F-connector
•
Silicone sealant or RTV
•
Wire strippers
•
Terminal crimp tool
• Optional PC with terminal emulation software
such as PROCOMM, Windows Terminal, or
Windows 95 Hyperterminal.
Use of a PC during
all installations is highly recommended.
Plan the entire installation before
proceeding! Take into account
component placement, running
cable distances between units, and
accessibility to the equipment after
installation.
While some DIRECTV IRDs offer
on-screen messages, it is
recommended that a PC be
available for all TracVision Cruiser
installations.
WHEN INSTALLING TRACVISION
CRUISER, DO NOT BEND OR
FLEX THE BASEPLATE TO
CONFORM WITH THE DECK
SURFACE!
