12. At each bracket, insert two hex socket screws
through the antenna bracket and mounting block
and into the nut bar.
Be sure to use the supplied
hardware.
Use a 2
1
⁄
4
" screw at the end of each
bracket and a 2
1
⁄
2
" screw at the base.
If you added
a spacer (page 2.10), use the 2
1
⁄
2
" and 2
3
⁄
4
" screws
supplied in the Spacers Kit instead (use shorter
screw at the end).
Tighten the screws to secure.
13. Flip down the skirt on each rubber mounting
block to hide the mounting plates.
14. Attach a protective cover onto each bracket. The
covers simply snap into place at the sides of the
brackets.
54-0350
2.11
Installing the Antenna
Mo
un
ti
ng
Block
N
u
t Bar
Mo
un
ti
ng
Plate
Vehicle Roof
A
n
te
nn
a Bracket
Cover
Hex
S
ocket
S
crews
Securing the Antenna to the Roof
Attaching the Cover
Two different sizes of covers are provided in
the kitpack. Install the two larger covers on
the rear brackets and the smaller covers on
the front brackets.
Proceed to Section 2-5 on page 2.16.
