background image

Trademarks

KVH and TracVision are registered trademarks of KVH Industries, Inc.

Programming, pricing, terms, and conditions are subject to change. Pricing
residential. Taxes not included. Receipt of DIRECTV programming is subject
to the DIRECTV Customer Agreement, a copy of which is provided at
DIRECTV.com/legal and in your first bill.

DIRECTV and the Cyclone Design logo, DIRECTV INTERACTIVE, TOTAL
CHOICE, DIRECTV HOME SERVICES, FREEVIEW, and DIRECT TICKET
are trademarks of DIRECTV, Inc. All trademarks, marks, names, or product
names referenced in this publication are the property of their respective
owners, and KVH neither endorses nor otherwise sponsors any such
products or services referred to herein.

StarSight Information – StarSight features licensed under one or more of the
following patents: 4,706,121; 5,151,789; 5,353,121; 5,353,277; 5,479,266;
5,479,268; and 5,532,754. Use rights reserved.

TruSurround Information – TruSurround and the 

symbol are trademarks

of SRS Labs, Inc. TruSurround technology is incorporated under license from
SRS Labs, Inc.

ENERGYSTAR Information – ENERGYSTAR and the ENERGYSTAR
certification mark are registered U.S. marks.

TiVo is a registered trademark of TiVo Inc., or its subsidiaries.

Software contained in the TracVision receiver and referenced in this manual
is copyright ©1995-2006 by DIRECTV, Inc. Some features are patent
pending. WatchWizard, PreSelect, TurboTune, and OneLine Guide are
trademarks of Hughes Network Systems. “NFL,” the NFL Shield, and “NFL
SUNDAY TICKET” are registered trademarks of the National Football League
and its affiliates. “NHL,” the NHL Shield, and “NHL CENTER ICE” are
registered trademarks of the National Hockey League. “MLB,” “MLB EXTRA
INNINGS,” “Major League Baseball,” and the Major League Baseball
silhouetted batter logo are service marks of Major League Baseball
Properties, Inc. Major League Baseball trademarks and copyright are used
with permission of Major League Baseball Properties, Inc. All other
trademarks and service marks are the property of their respective owners.

Patent Protection 

TracVision A7 is protected by EU Design #000050877-0001; US patents
D493,164; 6,856,300; 6,967,619;

 

6,977,614

; and 7,102,571

.

Disclaimer 

Every effort has been made to ensure the correctness and completeness of
the material in this document. No company shall be liable for errors
contained herein. The information in this document is subject to change
without notice. No warranty of any kind is made with regard to this material.

Note on recording programming

Most television programs and films are copyrighted. This means that
someone has legal rights governing the reproduction and distribution of this
material. In certain circumstances, copyright law may apply to private taping
of copyrighted materials. In most cases, it is permissible to record for your
personal use, as long as you do not sell the material. You must act
responsibly in this area–check into the matter if you are unsure.

Some pay-per-view programs may be licensed from producers as “view-only”
programs. These are copyrighted programs, and may not be copied or
reproduced for any purpose without the express written permission of the
copyright owner.

54-0350

ii

TracVision A7 Installation Guide

Summary of Contents for TracVision A7

















































Reviews: