54-0350
3.3
Installing the Receiver
3-1
Choose the Receiver Location
Now that you’ve installed the antenna, you need to
find a suitable location inside the vehicle for
installing the receiver. The receiver should be
installed in an area that meets the following
requirements:
•
Dry
•
Well-ventilated
•
Away from heat sources
•
Allows enough open space (at least 2" around)
for ventilation and cable connections
3-2
Wire the Receiver
For the TracVision system to work, you will need to
connect the following cables to the receiver:
•
Antenna cable
•
RF converter cable
•
Audio/video (A/V) cables
•
DC power cable
The procedures in this section are intended
for a basic wiring configuration. If the
vehicle’s entertainment system is wired
differently, use these procedures as a guide
and connect the cables as needed to suit
the vehicle’s particular configuration.
This section explains how to wire a single
TracVision mobile receiver. For details on
connecting additional receivers, refer to
Appendix A in the TracVision Mobile
Receiver User’s Guide.
