Step 1 - Remove the Mounting Brackets
Remove the four mounting brackets from the antenna’s base. At
each bracket, use a
1
⁄
4
" driver and the supplied T27 TORX bit to
remove the three
1
⁄
4
"-20 x 1" TORX screws.
Step 2 - Remove the Trim Ring
At the antenna’s base, use a
5
⁄
32
" hex bit to remove the twelve
#10-32 x 1
1
⁄
8
" hex screws that secure the trim ring (the plastic top
cover) to the antenna. Carefully lift off the trim ring and set it
aside in a safe place.
Antenna Reshipping Instructions
54-0217 Rev. E
1
TORX Screw Head
Removing the Trim Ring
Removing the Brackets from the Antenna’s Base
1/4"-20 x 1" Button-head
TORX Screws
Mounting Bracket
Antenna
#10-32 Hex Screws
(x 12)
Trim Ring
Radome
Summary of Contents for TracVision A5
Page 1: ......