54-0239
TracVision A5 Shop Manual
© 2005 KVH Industries, Inc., All rights reserved.
DO...
• DO install the receiver in a dry, well-ventilated area away from any
heat sources.
• DO allow at least 2 inches of empty space around the receiver for
ventilation.
• DO place the RF converter at least 3 feet away from the receiver
and other electronic devices.
• DO set up the program guide for the customer’s time zone
(see
page 4.8 of the TracVision A5 Installation Guide).
• DO give the Activation Card to the customer.
Be sure to affix the
antenna serial number label to the card.
• DO order an additional A5 receiver from KVH if the customer
requests two receivers.
• DO be sure to read carefully the “Power” Do’s and Don’ts.
DO NOT...
• DO NOT install the receiver near a heat vent.
• DO NOT install the receiver in an enclosed space with no
ventilation.
• DO NOT place the RF converter behind a metal surface or in an
area surrounded by metal (e.g., under a seat).
Do’s and Don’ts - Receiver
Effective April 2005
Subject to change without notice
Summary of Contents for TracVision A5
Page 1: ......