Road transport
57
Observe transport width
Observe the permissible transport widths. Put the machine in the
transport position and attach lights, warning signs and protective
equipment. The driver and keeper of the vehicle are liable for any
non-compliance with national traffic regulations.
Clean lighting equipment before road transport
All lighting equipment must be cleaned before road transport. Crop
residue or dirt may cover up the lighting equipment and adversely
affect its correct operation. This could cause traffic accidents and
accidents with fatal consequences.
Attaching the tine guards
For operation on public roads and in the park position, all tine
supports which are level with the field of vision (2.0 m) and project
beyond the width of the chassis must be safeguarded using the tine
guards provided. This could cause traffic accidents and accidents
with fatal consequences.
Observe the contour of the terrain
Move the machine onto ground that is as flat as possible before
changing from the working to the transport position. Avoid inclines
on which the combination (tractor and machine) could slip or
overturn. There is an increased risk of tipping and injury in a
position at right angles to the direction of the slope.
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
