Maintenance
86
Maintenance terms
Listed in this table are short explanations of the most important
maintenance terms.
Task
Explanation
Greasing
Apply grease to the slide surfaces using a brush.
Lubrication
One or two presses of the grease gun, unless specified otherwise.
Oiling
Unless specified otherwise, use only plant-based oils, such as rapeseed oils.
The use of used oil will endanger your health and is also strictly prohibited.
Replacement
Replace the appropriate part in accordance with the instruction in the
Maintenance chapter.
Inspection
Check the tyre pressure, adjustment dimensions and seal tightness as
required, and replace any worn parts or seals.
Observe the maintenance
intervals.
The specifications relate to an average usage of the machine. If subjected to
heavier duty (e.g. by contracting companies), select the maintenance
intervals to be shorter. Also, for extreme working conditions (for example
heavy dust creation), shorter maintenance intervals are possible.
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
