Operation
77
Single swath with
right rotor in transport
position
The inactive side shaft is removed.
See »Remove the side shaft«, page 74.
Using the tractor's single-acting control device, raise both rotors
into the headland position until the lift arms lock.
To release them, pull the cable on the mechanical lock for the left
rotor and keep tensioned.
Switch on the pilotbox and set the 3-way switch to C.
Lower the left rotor using the tractor's single-acting hydraulic
control device.
Switch the 3-way switch to the neutral position and switch off the
pilotbox.
Switch on the drive for the PTO shaft at a low speed.
Select a driving speed at which the crop is picked up cleanly and
completely.
The left rotor picks up the crop.
Single swath with
left rotor in transport
position
The inactive side shaft is removed.
See »Remove the side shaft«, page 74.
Using the tractor's single-acting control device, raise both rotors
into the headland position until the lift arms lock.
To release them, pull the cable on the mechanical lock for the right
rotor and keep tensioned.
Switch on the pilotbox and set the 3-way switch to “A”.
Lower the right rotor using the tractor's single-acting hydraulic
control device.
Switch the 3-way switch to the neutral position and switch off the
pilotbox.
Switch on the drive for the PTO shaft at a low speed.
Select a driving speed at which the crop is picked up cleanly and
completely.
The right rotor picks up the crop.
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
