Kverneland H Series, Technical & Service Manual, Page: 20 / 52

20
2. Disassembly
20
• Tools :
Chisel, hammer, snap ring pliers,
Extractor, fork wrench n°17, adjustable wrench
.
• Disassemble oil seals (4),(30)
• Disassemble snap ring (3), shim (6).
• Hit the shaft (29) from side (C)
• Pick up outer ring (5),disassemble inner ring
(5) from shaft (29), take away shim (2)
• Pick up from inside housing : Gear (7)
• Shim (1), spacer(16), gear(18),spacer(20)
• Gear (31),spacer (65) inner ring (5)
• Unscrew bolts (10), disassemble cover (9)
• Hit the shaft (19) from side (D) hole,
To reach the snap ring (24) from side (E)
• Take away inner ring (62).
• Disassemble snap ring (24) and shim (23)
• Uncaulk locknut (11), unscrew locknut (11).
• Tools :
Extractor, snap ring pliers, chisel, hammer.
• Disassemble shaft (19), inner ring (12)
snap ring (8) and take away shim (13)
• Disassemble snap rings(52) spacers
(63), pistons 53) and spring(50)
• Take away gears (14),(18),(21)
• Disassemble bearings brass (15),(22)
using chisel paying attention not to
damage the brass surfaces.
• Disassemble outer rings (5), (12),(62)