Kverneland H Series, Technical & Service Manual, Page: 51 / 52

51
51
Hydraulics – fittings
Assembly of fittings:
- Fit the connecting nut onto the
tread of the fitting and tighten it
with your fingers as tight as
possible.
- Tighten the nut with the
required spanner by
¼ turn.
Connection is tight.
- If you tighten the
components too high, torque
will damage the fittings

leakage in the system
¼ turn
Leakage
- If hydraulic connections are
bleeding in between two
components, the connection
has to be replaced.
- Too much addition torque with
a tool will destroy the hydraulic
parts.
If you tighten the thread with to
high torque you will elongate the
threats and the fittings starts
leaking.