Acceptance and assembly
43
Acceptance and assembly
Inspection at
the time of acceptance
N
OTE
In order to guarantee sufficient clamping force to secure the parts in
place on the chassis, a tightening torque of 600 Nm must be applied
(
440 ft.lbf
).
Check and tighten, if necessary, after the first few hours of use.
Assembly of the
arms
Accessory arms
Pass the arms through the yokes.
Hook the arms into the yokes at the rear of the machine.
Roller arms
Pass the arms through the yokes.
Secure the arms in the front yokes with the bolts.
\
WARNING
Where a machine is partly disassembled, follow the assembly
instructions.
If the machine is delivered partially assembled, carefully follow the
instructions given in the assembly booklet in order to avoid serious
injury.
Summary of Contents for CLC PRO
Page 8: ...Safety 8 ...
Page 9: ...Safety 9 Folding machines ...
Page 10: ...Safety 10 ...
