Adjustments
66
Adjustment of depth control
wheels [+]
During the operation, make sure that the chassis remains
horizontal in working position.
Fixed machines
Raise the machine.
Hold the wheel.
Remove the pin on the adjustment shaft (A).
Remove the adjustment shaft.
Slide the wheel mounting to the required position.
Replace the adjustment shaft.
Lock the shaft with the pin.
Adjust each wheel the same way.
Folding machines
Raise the machine.
Turn the adjustment rod (B) using the 27 open-end spanner.
Adjust each wheel the same way.
Check the length between the rod shaft; this must not exceed
720 mm (
28
1/2
”
).
Test in field and correct the adjustment if needed.
A
B
Summary of Contents for CLC PRO
Page 8: ...Safety 8 ...
Page 9: ...Safety 9 Folding machines ...
Page 10: ...Safety 10 ...
