Kverneland a-drill Operating Manual Download

Page: 68 / 115

Delivery and assembly

Passage of hoses

Order of distribution for

seed hoses

Length of hoses

Mounting the hose support chain



Use the support containing a spring (E).



Install the spring support on the exterior arm, ensuring that the

spring is directed towards the interior of the machine.



Fix the support using a metal clamping ring.



Use the link support (F).



Install the link support on the interior arm, ensuring that the link is

directed towards the exterior of the machine.



Fix the support using a metal clamping ring.



Attach the chain to the spring.



Tighten the chain so that the weight of the hoses does not make it

bend.



Attach the chain to the link.



Cut the excess chain.

Ensure that you respect the

seed outlet numbers compared to the

spreader positions.

Hose 4

Hose 3

Hose 2

Hose 1

4m00 (

13’1”

)

5m00 (

16’5”

)

6m00 (

19’8”

)

Hose 1

3200 /

126”

3800 /

150”

4200 /

165”

Hose 2

2600 /

102”

3000 /

108”

3400 /

134”

Hose 3

2000 /

79”

2300 /

91”

2500 /

98”

Hose 4

1600 /

63”

1600 /

63”

1600 /

63”

Summary of Contents for a-drill




















































































































Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands

Kverneland a-drill, Operating Manual

Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands