Kverneland a-drill, Operating Manual

Page: 102 / 115

Adjustments
102
Emptying the hopper
Hopper emptying may be necessary at the end of work, or when
changing seeds or the distribution rotor.
The hopper emptying is operated on the opposite side to the hose
connection to the seed drill.
Follow this procedure:

Unscrew the knobs located on the distribution sheet.

Turn the sheet and place it on the lower sheet so that it can be used
as a slide for the seeds.

In the main menu of the box, choose the tab “Empty”.

Press on XX to validate.

The rotor turns at maximum speed without blower.

To stop the emptying, press on XX, XX, XX or XX.
 Once the emptying is finished, the display returns to the main
menu.
Hour counter
•
The hours displayed on the counter correspond to the total and
daily operating duration of the distribution rotor.
•
The counter starts as soon as the distribution rotor starts turning.

To reset the "hour" tab to zero, press on the button XX for 5
seconds.
The "Total hours" tab cannot be reset to zero.
Operating voltage and
current intensity
This screen displays the operating voltage and current intensity in the
blower motor and distribution rotor motor.
Fluctuations in the operating voltage indicate an electronic
malfunction in your dashboard. This may have a negative impact on
distribution.
Emptying runs !
Seed removal
A
B
C
0.38 h
23.46 h
Total hours:
Hours:
I-
1:
I-
2:
Operating voltage:
12.6 A
1.2 A
11.7 V
A B
A Indicates, in amperes (A), the current inten-
sity in the blower motor.
Max. 15A
B Indicates, in amperes (A), the current inten-
sity in the distribution rotor drive motor.
Max. 5A