Kverneland a-drill Operating Manual Download

Page: 109 / 115

Adjustments

109

The flow in kg/ha or in grains/m² is

not displayed.

•

Incorrect calibration.

•

The values have been changed in

the calibration menu.



Perform a calibration.

Flow too low or too high.

•

Incorrect speed.

•

The lifting mechanism sensor

switches when working.

•

The grain properties have

changed.



Check the surface counter.



Check the working speed.



Calibrate the speed sensor.



Check the sensor of the lifting

mechanism.



Perform a calibration.



Reduce the speed of the

hydraulic turbine.

Return pressure too high.

•

Pipe cross-section too small.

•

The pipe is too long.

•

Return filter clogged.



Use a larger pipe cross-section.



Reduce the length of the pipe.



Use a new return filter.

Problem

Cause

Solution

Summary of Contents for a-drill




















































































































Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands

Kverneland a-drill, Operating Manual

Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands