Kverneland a-drill, Operating Manual

Page: 100 / 115

Adjustments
100
Calibration of travel speed
It is necessary to carry out a calibration as the box uses these values
as a base to do the calculations (display of speed, dosing, calculation
of surfaces, etc.)
Test distance
The test distance is 100 metres (
328’
)

Measure a distance of 100 metres (
328’
).

Mark the start and finish.

In the main menu of the box, choose the tab “Speed calibration?”.

Press on XX to select this tab.

Choose the tab "Calibration distance 100m?".

Press on XX.

Press on XX to start the test and begin to advance.

Having travelled 100 metres (328’), press on XX to stop the
calibration.
 The following message is displayed when the calibration is
finished.
 The number of radar impulsions on the ground during the 100
metres is displayed. Note this number, as it could be useful in case
of loss of the calibration values.
=> STOP
Drive 100m
=> START
Test Track
100m ?
Calibrate
Speed ?
Speed
calibrated !