Kverneland 2620M, Manual

Page: 43 / 47

43
Swath roller
Swath roller
Swath board
Swath board
High skids
High skids
• The machine can be fitted
with high skids if a higher
stubble height is required.
High skids are recommended
for uneven fields with lots of
stones or molehills.
• The skids are available in the
following heights:
(20mm. (3/4” is standard for the
US and Canada)
• The machine can be fitted
with a swath roller on the
right-hand side and / or left-
hand side (see next picture) of
the cutterbar, which guides
the crop in towards the middle
of the cutting width.
• The machine can be fitted
with a swathboard on the
right- hand and the left-hand
side of the cutterbar, which
guides the crop together in the
middle of the cutting width.
Options
Cone Left-hand side
Cone Left-hand side
• The machine can be equipped
with a cone fitted on the
cutterbar's outermost left-
hand cutting disc which aids
the flow of crop over the
cutterbar.