Kverneland 2620M, Manual

Page: 40 / 47

40
Maintenance
Alignment discs Wearing soles/skids
• Inspect the timing of the discs.
Out of timing could be caused
by an impact of foreign
objects. If so, please check
the key in the hub.
• Carry out a visual inspection
of the machine's stone guard
and counter knife for wear
with the cutting unit in the
headland position.
• Stone guards and counter
knives with visible holes
caused by heavy wear must
be replaced immediately.
Note;
Stone guards are the same for
all models but not the counter
knives as the distance between the
hubs is not the same for all
models.
How to check alignment discs
How to check wearing of soles
• Every season;
remove the top
cover on the cone.
• Clean any dirt from inside the
cone.
•
Fit the top cover on the cone.
Internal inspection drum
Drum Quick fit
• If the machine is fitted with
knife quick release*, the same
requirement applies for bolt
wear and torque.
Wearing quick fit