Kverneland 2620M, Manual

Page: 16 / 47

16
Attachment
Setting of suspension
Attachment
PTO
Attachment
Parking catch
Attachment
Stabilizer chains
• Lift the machine well clear of
the ground.
• Tighten the tractor's stabilizer
chains.
Release the parking catch on the
machine.
•
Turn the catch to the position
shown.
• The catch must be able to be
turned to the position shown
when the machine is attached
and is lifted free of the ground
with the tractor's three-point
hitch.
Assembly - attachment
• Attach the PTO shaft to the
tractor.
• Check that the PTO shaft is
secured to both the tractor
and machine.
• Check that the protective
tubes are secured with chains
so that cannot rotate with the
shaft.
• The freewheel on the PTO
shaft should turn towards the
machine.
The suspension is adjusted in the
following way:
•
Lifting bolts both horizontal.
• Raise/lower the lift arms until
there is approx. 15 - 30 mm
(5/8” - 1 3/16”) clearance
between the lock catch and
the stop.