Maintenance and care
51
Replacing Quick-
fit points
Wear eye protection
Wear eye protection when replacing Quick-fit points. Otherwise, there
is a risk that splinters from the Quick-Fit points can cause eye dam
-
age.
Removing a worn point
> Place the gore tool
> Knock the point out
Fitting a new point
> Place the new point the right way around
> Use the gore tool as a buffer between the point and the hammer
> Knock the point into place
There must be no paint on the angled surfaces
T
IP
! Rotating the Quick-fit points.
When the Quick-fit points are approximately 50% worn, they can be
moved from the body on the right-hand side to the left. This gives bet
-
ter penetration.
Replacing Knock-
on® points
Wear eye protection
Wear eye protection when replacing Knock-on
®
points. Otherwise,
there is a risk that splinters from the Knock-on
®
points can cause eye
damage.
Removing a worn point
> Place the gore tool
> Knock the point out
Fitting a new point
> Place the new point the right way around
> Use the gore tool as a buffer between the point and the hammer
> Knock the point into place
There must be no paint on the angled surfaces