Kval 990-H, Operation Manual, Page: 73 / 88

Screw Shift
See “How to Enter Calibration Data” on page 2-40 ,
for instructions to enter calibration data. Tunes the
servo motor for the screw locations of Head #1 and
Head #3. This is calibration is included with the “Pro-
grammable Door Index and Hinge Applicator Posi-
tioning' Option.
X:
+
Offset
X:
-
Offset
Feed System Timing
Infeed Stop:
This is the time, in seconds, between
the period the door covers the “After-Infeed Eye”
and when the door clamps. Longer times will
allow the door to feed longer.
Out feed Stop:
This is the time, in seconds,
between the period the door covers the “before-out
feed eye” and when the door clamps. Longer times
will allow the door to feed longer.
Setup Screen
KVAL 990-H Operation Manual
2-44