Kval 990-H, Operation Manual

Page: 63 / 88

Hinge Spec Group
Set or displays the parameters of the hinge settings.
Hinge Enable/Disable Button:
Press
to enable or disable the routers that machine hinge pocket.
•
Length:
Displays or sets the
length of the hinge pocket.
•
Height:
Displays or set the height
(vertical) of the hinge pocket
•
Depth:
Displays or set depth (Z
axis) of the hinge pocket
•
Radius:
Displays or set the
rounded corners of the hinge
pocket
•
Speed:
Select speed of the router.
The range is 100% to 20%. The speed can be change during process of machining.
•
Pre-Drill Pattern:
.You can select
Pre-Drill
buttons to down load pre-drill parameters
or turn off this function. To set
Pre-Drill
parameters, see “About the Pre-Drill Screen”
on page 2-49 .
Buttons:
• Jamb Kick Out:
• Hinge 2 Disable/Enable:
• Screw Insert Enable/ Disable
Specs
Backsection Group
Set or displays the lock parameters, in the
Backsection
group. The settings include lock
specifications for 3 lock settings, the ability to
enable and disable
lock bore, bolt drill,
and function drill
face plate routing
NS.
Lock (#1-3):
Dis-
plays the position
of the lock mea-
sured from the
top of the door.
•
Lock Bore:
Press the
Lock Bore
button to enable or disable the Lock Bore
•
Bolt Drill:
Press the
Bolt Drill
button to enable or disable the Bolt Drill.
•
Face Plate:
Press the
Face Plate
button to enable or disable the Face Plate.
•
Lock Backset:
Indicates the backset distance for the each downloaded preset.
•
Fast Plate Routine:
Select to toggle to route a face plate.
Main Screen
KVAL 990-H Operation Manual
2-34