Section 3—Inspection & Mounting
3.4
3.2.2. Front Antenna Mounting
Provided with the Eagle II is a windshield mount for the
antenna. Contact your District Manager or Kustom Signals'
Customer Service department for other optional antenna
mounts.
NOTE: Mounting of the antenna bracket to the dashboard
or any metal bracket (such as the radio rack) may
cause improper grounding of the antenna. This
would be noticed by reduced range and/or a high
pitched squeal in the audio. Use of the Kustom
Signals' isolation kit, P/N 050-0200-00 will
eliminate improper grounding.
1. Attach the antenna to the mount.
2. Connect the antenna to the Eagle II's indicator unit, front
antenna port. Refer to Section 4.1 for antenna port
location.
3. Connect the Eagle II's power connector to the proper
power source. See Section 3.2.0.
4. Momentarily depress the POWER switch on the front
panel of the Eagle II (refer to Section 4.0 for location
and function of front panel switches). It will process
through a lamp test and internal test as described later in
Section 6. Select Stationary mode by depressing the
MODE switch, if necessary. Both direction
antenna/mode indicators (front antenna) will be lit.
Stationary Mode
Front Antenna
