Section 2--Specifications
2.4
Indicators:
Low Voltage:
"Lo" displayed in TARGET
window when supply voltage falls
below input of 10.8 VDC.
Locked speeds will remain.
Radio Frequency
Interference:
"rFi" is displayed in TARGET
window during radio frequency
interference. Active speed
displays will blank during this
condition. Locked speeds will
remain.
Error:
"Er
X
" (“
X
”=4, 5, or 6) is
displayed in TARGET window
when an internal error in the
operating system is detected.
Active speed displays will blank.
Locked speeds will remain.
Hold:
"HLd" is displayed in TARGET
window when system is not
transmitting. Controlled by
remote or front panel switch.
Road Graphic:
These indicators are used to show
the mode of operation and
selected antenna.
