Section 13--Options
13.3
13.1.3. Interface Output Protocol
The Eagle II defaults to allow the radar unit to interface the
KSI Eyewitness
®
video or giant display equipment. Contact
Kustom's Customer Service Department at (800)-835-0156
or (620) 431-2700, before changing the output protocol
option.
13.1.4. Speed Reading Units
The Eagle II defaults to displaying the speed-readings in
miles per hour. If kilometers per hour reading are required,
add 128 to the Options total.
13.2. Options Examples
Using the above options list, add all the numbers for the
options you want active. NOTE: default options, such as
MPH and Patrol Blank, have a value of zero (0).
To enter the Options Menu mode, power the unit off, then
press and hold the POWER switch until the power-on
sequence stops. Press the TEST switch until OPt appears in
the TARGET window and a number appears in the LOCK
window. This number may be zero.
Using the UP and DOWN arrows (AUDIO and RANGE
switches), increase or decrease the number for the value
needed. To make these changes permanent (until changed
again), depress the LOCK/REL switch once. When the
options have been accepted, the unit will automatically
return to radar mode.
