Section 6--Testing Procedures
6.3
6.4.
Accuracy Testing
Depress the MODE switch, if necessary, to place the Eagle
II in the stationary mode of operation.
MODE
Select
Stationary
or
FRNT
REAR
Select
Antenna
Momentarily depress the TEST switch. Holding the TEST
switch depressed will light all displays. Upon releasing this
switch, the Eagle II will complete the internal test. If these
tests pass, the TARGET window will display "PAS". If the
TEST button is held depressed for greater than 10 seconds,
the internal test will proceed as a default condition.
NOTE: No audio or range indications will be shown.
Depress the MODE switch to place the unit in the moving
mode. The opposite direction antenna/mode indicator will
be lit.
MODE
Select
Moving
or
FRNT
REAR
Select
Antenna
Momentarily depress the TEST switch. If the system is
working properly, the unit will proceed through the lamp
and internal tests as described above.
Internal test tolerance: + 0.
