Kusam-meco M3500A, Operation Manual, Page: 28 / 158

28
3-1. The first row in SETUP section
z ◁▷
: Scrolls through buffer, conceals or reveals the digits while
measuring.
3-2. The second row in SETUP section:
z
ESC: Cancels selection, moving back to measurement display.
z
ENTER: Accepts selection, moving to next choice or back to
measurement display.
z
LOCK: Presses SHIFT then ESC button to prevent unpredictable
operation on the panel. In order to release lock condition, please
press ESC again.
3-3. The third row in SETUP section:
z
CONFIG: Offers setting or adjusting function, relating some front
panel buttons.
z
MENU: Offers setting or adjusting function, not relating other front
panel buttons.
4. RANGE:
z
△
: Moves to higher range.
z
▽
: Moves to lower range.
z
AUTO: Enables or disables auto-range.
5. Terminals: Selects input signal connections on front or rear panel.
6. Inserted Connections & Fuse Device:
z
4 Chassis Ground Connections: Separate environmental noises.
z
HI & LO: Used for all measurements, except DC and AC current.
(Maximum input voltage: 1000V for voltage measurements. 200V for
4-wire measurement)
z
LO & I : Used for making DC and AC current measurements.
z
Front Fuse: Secures your Meter against damage of strong current pulse.
(Maximum current: 3A, 250V)