Global Functions
MIDIScope
94
HereÕs what the abbreviations mean:
NT
Note messages
CC Controller
messages
SY System
messages
SX SysEx
messages
The left soft button will move a cursor to the 4 possible *
positions in sequence. Use the +/ - buttons or the spinknob to
select (* shown) or unselect a message type. Any combination of
message types may be selected.
Press the right soft button to continue to the MIDIScope screen.
The initial MIDIScope screen will appear as follows:
MIDIScope ACTIVE
Freeze Unfreeze
This will persist until the Þrst message is received. Thereafter
messages (except SysEx) will be displayed as follows:
MIDIScope ACTIVE
1234 NO3 XXX XXX
The two character mnemonic identiÞes the message type and the
digit identiÞes the channel. For channels 10-16, the
ExpressionMate uses a special font capable of displaying 2 digits
in one character space.
The message types are:
NF Note
Off
NO Note
On
PP Poly
Pressure
CC Control
Change
PC Program
Change
CP
Pressure
PB Pitchbend
The "XXX" Þelds are data bytes and can be displayed in either
hexadecimal ($HH) or decimal (DDD). Pressing Global toggles
the mode for SUBSEQUENT message display.
The "1234" Þeld is the number of milliseconds elapsed between
the previous message and this message. If more than 2.5 seconds
elapse, the Þeld will be "####".
Summary of Contents for ExpressionMate
Page 10: ...Contents x...
Page 124: ...Sending MIDI Messages 114...
Page 132: ...ExpressionMate ROM Setups Setup Descriptions 122...
