Global Functions
Global Parameter Set
81
Merge Unprocessed (MergUnPro)
MergUnPro lets you choose what to do with notes that are
intercepted by the Arpeggiator and/or note processor. When you
merge notes and/or controllers, both the processed and the
unprocessed notes will be output. When you do not merge, only
the processed notes are sent to the output.
You can merge notes, controllers, both or neither. The default is
Notes which lets you take full advantage of the ExpressionMateÕs
velocity curves and note mapping features. Keep in mind that if
you are remapping pitch bend to another controller and the
MergUnPro is set to Cntrls or Both, the pitch bend will be sent as
well as the remapped controller.
Arp Clock
This is where you set the source of the ArpeggiatorÕs clock. It can
receive the clock over the Main or Aux MIDI In; the default is the
ExpressionMateÕs internal clock.
Send Clock (Send Clks)
Use this option to send the ExpressionMateÕs internal tempo
clock (at 24 clocks per beat) to either the Main or Aux Out. The
default is Off, which is generally a good setting, since sending
clocks can use up almost 10% of MIDIÕs bandwidth.
Program Change Parameters
You can change Setups by sending Program Change messages
from an external device, such as a sequencer or keyboard. Several
parameters determine how the ExpressionMate will respond to
these program changes.
Ext PgmCh
This option determines whether the ExpressionMate will
respond to external Program Change messages, and on which
channel (Main 1-16 or Aux 1-16). The available values are None,
Main1-16, and Aux1-16.
Summary of Contents for ExpressionMate
Page 10: ...Contents x...
Page 124: ...Sending MIDI Messages 114...
Page 132: ...ExpressionMate ROM Setups Setup Descriptions 122...
