Kurzweil ExpressionMate, User Manual

Page: 32 / 138

Editing and Creating Setups
Getting Around
22
Getting Around
The upper line shows the Setup number and the current Zone. It
also shows the parameter number (left of the :) and value number
for those who really like numbers. The bottom line shows the
parameter name and value name or number for the rest of us. An
underline below the bottom lineÕs : signals that the parameter has
the same value in all zones.
The cursor buttons (< and >) below the display select parameters.
To change the value of a parameter, use the data knob or the - and
+ buttons on the front panel. If you hold a button down, it keeps
scrolling. Each controller has several parameters, so even
scrolling can get pretty tedious. For example, if you are looking at
RBN and you want to get to BRTH , you have to scroll through all
of the RBN parameters Þrst. Therefore, you have two other
options: Jump selection and Intuitive Entry.
Parameters
Controller Editor
Names
Values
MIDI Channel MIDI Chan None, Mn 1–16, Aux 1–16
Ribbon
configuration
parameters RBN Split, RBN Mode,
RBN Sprg (see page 25)
Controller
assignment
parameters RBN (or RBN1, 2, &3),
BRTH, CCPD, SP1&2,
SW1&2, FIX1, 2, &3,
MAP1, 2, &3, Hi/Lo
Key Range, ZnXpos,
NtVl curve, CCnote
scales, ZnNoteMap (see pages 28-56)
SU 1 1:1|||Z1|
|||
MIDI Chan:Mn 1|
Setup
Number
Parameter
Name
Value Name or
Number
Zone
Param:Value
Number