Global Functions
Global Parameter Set
79
Figure 5-1. RBN Dir settings.
MIDI Merging
If you look at the back of the ExpressionMate, youÕll see that it
has two MIDI interfaces: the Main interface and the Aux
interface. Each interface lets you send incoming data to either
MIDI Out port, along with any internal messages that you
generate with ExpressionMate Setups.
There are lots of uses for this; for instance, you might want to
send several sets of messages to an instrument with only one
MIDI In port. You could also send messages from different
instruments to just one track on a sequencer. There are other
possibilities too.
The ExpressionMate can merge all kinds of MIDI messages,
including Realtime messages and SysEx.
MainMrgTo and Aux MrgTo
The
MainMrgTo
and
Aux MrgTo
parameters tell the
ExpressionMate where to send messages that it
receives
at the
Main In port or Aux In port, respectively. You have three choices
for each:
•
Choosing
Off
disables merging for the input. The
ExpressionMate will respond to messages received at the
RBN Dir = Right
0
127
RBN Dir = Left
127
0
Section 1
Section 2
Section 3
Section 3
Section 2
Section 1
Summary of Contents for ExpressionMate
Page 10: ...Contents x...
Page 124: ...Sending MIDI Messages 114...
Page 132: ...ExpressionMate ROM Setups Setup Descriptions 122...