28
Operation
GB
Keep-warm function
With the keep-warm function you can use one of the cooking zones to
keep food warm. The respective cooking zone is operated at a low power
level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
2.
Keep the Minus key
pressed
to switch the power settings down
( ... 3, 2, 1,
). The setting will stop at and the warming function will
have been activated.
3. Press the
Minus key
once to de-activate the function (0).
The keep-warm function is available for 120 minutes, after which the hob will
be switched off.
Power boost setting
(cooking zones marked with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 9.
1. A cooking zone must be switched on. The stand-by dot of the cooking
zone must light up. It may be necessary to press the
cooking zone
selection key
.
2. Press the
Power key
once in order to activate the power boost set-
ting. The power display will show a P.
3. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 9.
Note:
In order to terminate the power boost setting press the
Minus key
or the
Power key
.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
keep pressed
Modules (power management)
