24
Operation
GB
Operating the keys
The controls described here expect the pressing of a (selection) key
to be
followed
by the pressing of a subsequent key.
The next key will need to be pressed
within 10 seconds
, otherwise the
selection will be deleted.
The Plus/ Minus keys can be touched individually or be permanently pressed.
Switching on the hob and cooking zones
1. Press the
ON/OFF key
until the power setting displays indicate 0.
The stand-by dots will blink. The controls are ready for operation.
2. Then press a
cooking zone selection key
(e.g.
for the left zone).
The stand-by dot of the cooking zone selected will light up.
3. Use the
Plus key
or
Minus key
to select a cooking level.
The Plus key will activate power setting 1 and the Minus key power set-
ting 9.
4. Immediately put
cookware suitable for induction cooking
onto the
cooking zone. The pan recognition device will activate the induction coil.
The pot or pan will be heated up.
As long as no metal cooking pot is placed onto the cooking zone, the dis-
play will alternate between the power level set and the symbol .
If no pot is placed on the cooking zone it will switch off after 10 minutes
for reasons of safety. Please refer to the Section on “pan recognition”.
Repeat items 2 to 4 in order to cook on other cooking zones at the same time.
Switching off a cooking zone
5. The stand-by dot of the cooking zone selected must light up. It may be
necessary to press the
cooking zone selection key
.
6. a) Press the
Minus key
several times until the power setting display
shows 0, or
b) press the
Minus key
and the
Plus key
once at the same time.
The cooking zone is switched off direct irrespective of the power setting
or
c) Press the
ON/OFF key
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
7. Press the
ON/OFF key
. The hob will be completely switched off, irre-
spective of any settings.
Suitable for induction cooking
Cooking zone selection keys Stand-by dot
