background image

Operation

GB

27

Automatic boost function 

Parboiling takes place at power level 9 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the elec-
tronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).

1. Switch a cooking zone on. The stand-by dot of the cooking zone selected

must light up. It may be necessary to press a 

cooking zone selection

key

 (e.g. 

 for the left zone).

2. Select power setting 9. Pressing the 

Plus key

 

 again will activate the

automatic boost function.
The power level setting will indicate A and 9 alternately.
In the case of induction, an A and   will be shown if no pot has been
placed on the cooking zone.

3. Then immediately use the 

Minus key

 

 to select a lower simmering

setting from 1 to 8.
A and the selected simmering setting will blink alternately.

4. The automatic boost function will operate as programmed. After a certain

time (see chart) the cooking process will be continued with the simmering
setting.

Notes
• While the automatic boost function is in operation, the Plus key can be

used to 

 raise the simmering power setting. Pressing the Minus key 

will switch the automatic boost function off.

• If, after activating the automatic boost function, the power level is left at

level 9 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 9.

• If a higher cooking setting or the power boost setting is activated, the auto-

matic boost function may switch off if the maximum power level is
exceeded (see power management).

Power setting

Automatic boost function

Time (min:sec)

1
2
3
4
5
6
7
8
9

 0:48

2:24
3:50
5:12
6:48
2:00
2:48
3:36

-

Summary of Contents for EKI 9730.0-35F

















Reviews: