Appliance description
GB
21
A
p
p
li
an
ce
d
es
cr
ip
ti
o
n
1. Induction cooking zone left
2. Centre induction cooking zone
3. Induction cooking zone right
4. Touch-control operating panel
5. Glass ceramic hob
6. ON/OFF key
7. Cooking zone selection key
8. Symbol for locating the position of a cooking zone on the
glass ceramic hob
9. Minus key (lower)
10. Plus key (raise)
11. Power setting display
12. Stand-by dot (cooking zone)
13. Power key
14. STOP key
15. Timer selection key
16. Switch-off time display
17. Control lamp for locating the position of a cooking zone on
the glass ceramic hob
18. Minute minder lamp
Operating the hob with the sensor keys
The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor key will then be indicated as “key”.
ON/OFF key
(6)
This key is used to switch the entire hob on and off. It is, as it
were, the main switch.
Cooking zone selection key (7) (e.g.
for the left zone).
Pressing one of the cooking zone selection keys available will
select a cooking zone, for which the Plus key or the Minus key
may be used to set the cooking level.
Minus key
(9) / Plus key
(10)
These keys are used to set the cooking levels, the automatic
switch-off device and the minute minder. The Minus key reduces
the setting and the Plus key raises it. The setting can be deleted
by pressing both keys simultaneously.
Power setting display
(11)
The power setting display shows the power setting which has
been selected, or:
H ............... Residual heat
P................ Power boost setting
.............. Pan recognition
A................ Automatic boost function
STOP ........ Stop function
L ............... Childproof lock
.............. Keep-warm function
A cooking zone can be switched on when the stand-by dot
lights up.
Power key
(13)
The power boost setting makes additional power available for
induction cooking zones.
STOP key
(14)
The STOP function can be used to briefly stop the cooking proc-
ess.
Timer selection key
(15)
For programming the automatic switch-off device (timer) and the
minute minder.
