GB
31
Automatic switch-off (timer)
The automatic switch-off device is used to automatically switch off
any cooking zone after an adjustable period of time. Cooking times
ranging from 01 to 99 minutes can be set.
1. Switch on the hob. Switch on one or more cooking zones and
select the required power settings.
2. Repeatedly press the
Plus key
and
Minus key
simulta-
neously until the control lamp (decimal point) of the cooking zone
of your choice lights up. The timer indicator will light up brightly.
3. Then immediately press the
Plus key
or the
Minus key
to enter the cooking time. In order to programme the automatic
switch-off device for another cooking zone, repeatedly press the
Plus key
and the
Minus key
simultaneously until the
control lamp (decimal point) of the respective power level display
lights up.
4. The cooking zone will be switched off when the time has
lapsed. A signal will sound for a while and can be switched off
by pressing any key (except the ON/OFF key).
Minute minder (egg timer)
The cooking zones are switched off.
1. Switch on the hob.
2. Press simultaneously once the
Plus key
and the
Minus key
. The timer indicator will light up brightly. The control lamp
(decimal point) may not light up in the cooking setting displays.
3. Then immediately use the
Plus key
or the
Minus key
dto
set the time in minutes.
4. Once the time has lapsed a signal will sound for a while and can
be switched off by pressing any key (except the OFF key).
Operation
Important
•
In order to check on the time that has lapsed (automatic
switch-off device), repeatedly press the Plus key and the
Minus key simultaneously until the control lamp (decimal
point) of the respective cooking zone lights up. The setting
displayed can be read and changed.
•
Terminating the function of the timer: Select the respective
cooking zone and use the Minus key to set 0.
Important
The minute minder will also remain in operation when the right or
left side of the hob is switched off. Switch the left or right side of
the hob on to adjust the time.
Setting for 5 minutes
Control lamp (decimal point)
Setting for 12 minutes
