Safety Instructions and Warnings
8
User's guide
2. Safety Instructions and Warnings
2.1. For connection and operation
□
Only KÜPPERSBUSCH ovens have been manufactured and tested for use under a
KÜPPERSBUSCH hob. Do not use other hobs.
□
Any handling or repair to the appliance, including replacement of the power cable,
should be carried out by authorised Technical Service Personnel using original
spare parts. Repairs or handling by others may damage the appliance or cause
malfunctioning that could be hazardous to your safety.
□
Statutory regulations and the connection speci
fi
cations issued by the local power
supply company must be strictly observed.
□
The power supply to the appliance must be disconnected when the oven lamp is
connected, repaired or replaced. Disconnect the fuse or pull out the power plug.
□
Installation must guarantee full safety against any potential contact.
□
Changing the installation location of a plug and replacing the mains cable may only
be carried out by an electrician who complies with the respective speci
fi
cations.
□
It is essential for the connection data (frequency and voltage) of the oven to comply
with that of the mains electricity supply in order for the oven not to be damaged.
Compare this data when connecting the oven. If in any doubt, ask a quali
fi
ed
electrician.
□
Multiple sockets and extension cables do not suf
fi
ciently guarantee safety (risk of
fi
re). Do not use them to connect the oven to the mains electricity supply.
□
Only use the oven when it has been installed in order to guarantee that it functions
safely.
□
Make sure that no electric cable from a free-standing or built-in appliance makes
contact with the oven.
