Manual
Kuhse Gateway Module
KGM - KEA
HB-KGM-KEA_EN Version 01
Date: 23rd. May 2017
Page 7 of 75
3
Safety regulations
These installation instructions and operating instructions contain all important information for
installing, configuring and commissioning the product. Please read through the document carefully
and ensure that it is available to all personnel who remove the product from the packaging,
connect it, configure it and commission it.
Please note: The product shall be unpacked, installed and
commissioned only by authorised specialist personnel. In the event of
improper handling, erroneous wiring of connections or improper use
in general, this can result in the failure of the product.
The manufacturer accepts no warranty or guarantee claims for damage resulting from improper
use of the product or erroneous wiring.
Please note: The product shall not be used with the housing open. In
this case the product can be permanently damaged through contact
with conductor tracks and electronic components. In addition, all
warranty or guarantee claims shall be void in the event that the
housing has been opened without the knowledge of the manufacturer.
This product contains sensitive electronic components. Please only remove the product from its
packaging immediately before its integration into an energy system. Please follow the rules for
good ESD practice during the installation and commissioning of electronic products. Please avoid
any impermissibly high mechanical stresses on the device. An unprotected installation in
environments that do not represent the technical operating conditions, is not permitted. Use in
outdoor areas and humid rooms is forbidden. Please protect the product from direct or indirect
moisture.
Please note: Please use the input and output connectors provided
with the product exclusively. Please follow the recommendations for
minimum cable cross-sections for the specified connections.
Defective devices should be immediately removed from operation and submitted for fault analysis
along with a written description of the fault that occurred.