Manual
Kuhse Gateway Module
KGM - KEA
HB-KGM-KEA_EN Version 01
Date: 23rd. May 2017
Page 30 of 75
6.3.4
Configuration - interfaces
All hardware interfaces can be activated and deactivated in this window. It is recommended to
permanently deactivate any unused interfaces.
Select the respective interface required for the application conditions and activate/deactivate this
via the drop-down field.
After changing parameters, the change must be permanently saved by clicking on the "Save"
button. If accidental changes are to be discarded, these changes can be rescinded by clicking the
"Cancel" button. Several parameters can be changed at the same time before needing to be
saved.
Changes that include intervention into the hardware initialisation may require a reboot of the
device. The system automatically detects whether a change necessitates a reboot and informs the
user accordingly. The user can now restart the device by clicking the "Restart" button. These
changes will then only be active after the device has restarted.