10. - Optional equipment
FC2860TLD-3160TLD-3560TLD
67
KN281CGB_L
Mower conditioner
High position:
- Loosen screw (1).
- Pivot lever (2) upwards and insert hooks on pin (3).
- Tighten screw (1).
- Adjust both sides to the same setting
.
Cutting height
- Place the machine on flat ground.
Adjustment must be made with the machine
coupled, hitch pins at 650 mm (26’’) from the
ground.
Cutting height is always adjusted before
adjusting the ground pressure.
The adjustment is centralized by means of the pitch
angle rod.
The height can be adjusted between 55 and
150 mm (2.17’’5.91"):
• Mark 1 = 55 mm (2.17’’).
• Mark 5 = 150 mm (5.91’’).
To adjust the cutting height:
- Lift lock (1).
- Turn clockwise to reduce cutting height (a).
- Turn counter-clockwise to increase the cutting
height (b).
- Lower lock (1).
1
2
3
1
a
b
