KUHN BKE 280 SUPER, Operator'S Manual

Page: 46 / 72

Shredders
44
BKE 280-305 SUPER
Instructions for work
With semi-pivoting wheels:
- Slightly lift the machine from the ground.
- Loosen screw (1).
- Remove screw (2).
- Position wheel arm in hole corresponding to the
required setting.
- Reinstall and tighten screw (2):
• Torque: 21 daN m (155 lbf ft).
- Tighten screw (1).
• Torque: 21 daN m (155 lbf ft).
Height of the tractor's lift linkage
- Lower the 3 point lift of the tractor until the rear support
element rests on the ground.
- Adjust lift linkage height to obtain a perfectly
horizontal position.
Relations between the working height and the
position of the wheels:
- Hole (a) = 28.5 mm (1.1’’).
- Hole (b) = 52 mm (2.0’’).
- Hole (c) = 83 mm (3.3’’).
- Hole (d) = 96 mm (3.8’’).
- Hole (e) = 125 mm (4.9’’).
e
Avoid modifying the linkage height to tilt the
machine frontwards.
When tilting the rear part of the machine
downwards, there is an increased risk of
material being ejected towards the operator.