KUHN AXERA-M, Operator'S Manual

Page: 22 / 46

22
3.4 Adjustment as per spreading charts (normal spreading / boundary
spreading during normal spreading)
Output point, disc type, mounting height and PTO speed must be adjusted as per the
spreading charts, according to the fertilizer used, desired working width and the type
of spreading operation to be adopted.
Normal spreading
Example: from spreading charts
Chosen fertilizer type: NPK BASF
Desired application rate: 509 kg / ha
Chosen working width: 21 m
Desired forward speed: 10 km/h
The spreader must be adjusted to the fol-
lowing settings:
Disc type: D4 M VXR
PTO speed: 540 rpm
Mounting height: 50/50
[
cm
]
measured
from top of standing crop.
Output point: 8.5 (left and right)
Metering slide position: 290
Boundary spreading during normal
spreading
Example. from spreading charts
Chosen fertilizer type: NPK BASF
Desired application rate: 509 kg / ha
Chosen working width: 21 m
Desired forward speed : 10 km/h
The spreader must be adjusted to the fol-
lowing settings:
Disc type on left-hand side (viewed in dri-
ving direction) : D4 M VXR
Disc type on right-hand side (viewed in
driving direction): DG 69. Here both vanes
must be set in their normal position (one
vane in D setting and the other in E).
PTO speed: 540 rpm
Mounting height: 50/50
[
cm
]
measured
from top of standing crop.
Output point: 8.5 (left and right).
With left- or right-hand boundary spread-
ing the output point can be individually set
according to working width and fertilizer
type (see spreading charts).
Metering slide position: 290