KUHN AXERA-M, Operator'S Manual

Page: 39 / 46

39
13.7 Boundary spreader discs DG 68 - DG 72
When mounted to the right-hand spreader side, the boundary spreader discs create a
steeply falling spread pattern. Over application of fertilizer at field edges or under
application within the field is reduced to a minimum. Due to the strong influence ex-
erted by fertilizer on spread patterns, the same spreading accuracy cannot always be
achieved when operating with normal spreading discs.
DG 68: Boundary spread distance 6 - 8m
(right-hand side viewed in direction of travel)
DG 69: Boundary spread distance 9 - 10.5m
(right-hand side viewed in direction of travel
)
DG 71: Boundary spread distance 12 - 14m
(right-hand side viewed in direction of travel)
DG 72: Boundary spread distance 15 - 18m
(right-hand side viewed in direction of travel
)
13.8 Boundary spreading limiter (GSE 5)
Using the adjustable boundary spreading limiter, it is possible to adjust the boundary
spreading limit between 0.75m and 3m. Settings vary according to fertilizer type be-
ing spread. If desired, the boundary spreading limiter can be equipped with an elec-
trical remote control. Separate fitting instructions are supplied with the boundary
spreading limiter.
13.9 Plus / Minus flow rate control (PMS 4 - N) / (PMS 5 - S)
The Plus/Minus flow rate control allows on-the-move adjustment in an infinitely
variable pre-set increase or decrease in application rate. The output can be changed
independently on either left- or right-hand sides. The operator control lever bracket
is attached within easy reach of the operator. Fitting instructions are supplied with
each Plug/Minus flow rate control.
13.10 Slip
clutch
When overloaded, torque is reduced and progressively transmitted during clutch
slippage. Sudden torque peaks will be reduced. Slip clutches are supplied together
with a separate manual.
13.11 Double acting mechanism ZWE 1
Using the double acting mechanism, the fertilizer spreader can also be used on a trac-
tor equipped with only one single acting control valve. Separate fitting instructions
are supplied with the double acting mechanism.